Rigid Industries 50in Adapt E-Series Light Bar - RIG290413

The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGIDs legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. The first layer of adaptive response is RIGIDs new Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicles electrical system. If the voltage is stable, the Adapt E-Series will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGIDs APM system will gradually reduce the lights power consumption until the vehicles voltage stabilizes. The second layer of adaptive response featured in the Adapt E-Series is RIGIDs proven Active View Technology. This technology uses an internal GPS module to determine the vehicles speed, allowing the Adapt E-Series to properly distribute all available power among three unique optic zones. Utilizing the three zones allows the Active View Technology to create the most optimal beam pattern to suit the vehicles speed. As the vehicles speed changes, power is dynamically routed through various optics. Utilizing scene optics for low speed, driving optics for moderate speed and spot optics for high speed driving. Rather than cycling between pre-set modes, power is transferred gradually between optic zones showcasing the beam transitions. This allows for seamless transition between beam patterns offered in the Adapt E-Series making it easier than ever to Own The Night. The RIGID Adapt E-Series uses Active Power Management™ (APM) to prevent voltage drop and Active View Technology™ with GPS to automatically adjust light across three optic zones (scene; driving; spot) based on vehicle speed. Professional Installation Recommended, RIGID Adapt

• Universal Fit / Fits All Existing E-Series Grilles And Mounts
• Active Power Management™ System - Power Capacity Sensing
• Slow Speed / Moderate Speed / High Speed Beam Patterns
• Active View Technology™ - Internal GPS Module
• 3 Optic Zones - Scene / Driving / Spot
• Harness / Switch / Relay Included
• Two Layers Of Adaptive Response
• Use In Adapt Mode Or All On
• Alloy Housing and Heatsink
• Limited Lifetime Warranty
• Seamless Beam Transition
• 9-36 VDC

The Rigid Industries 50in Adapt E-Series Light Bar, part number RIG290413, combines the established E-Series construction with adaptive lighting technology. Its high-strength aluminum housing and heat sink are paired with an unbreakable polycarbonate lens. Professional installation is recommended.

Active Power Management™ continuously monitors input voltage and adjusts power consumption when available vehicle power begins to drop. Active View Technology™ uses an internal GPS module to distribute available power across three optic zones according to vehicle speed. Scene optics support low-speed driving, driving optics support moderate speeds, and spot optics support high-speed driving.

The light bar provides seamless transitions between beam patterns rather than cycling through preset modes. It can be used in Adapt mode or All On mode and operates on 9-36 VDC. The universal-fit design fits all existing E-Series grilles and mounts. A harness, switch and relay are included. This product carries a limited lifetime warranty.

Key Features & Performance Benefits

• Adaptive power management helps reduce power consumption when vehicle voltage drops.
• GPS-based Active View Technology automatically adjusts the beam distribution according to vehicle speed.
• Three optic zones provide scene, driving and spot beam patterns for different driving conditions.
• Seamless beam transitions support continuous adjustment between lighting patterns.

Key Product Specifications & Technical Data

• Brand: Rigid Industries
• Part number: RIG290413
• Product: 50in Adapt E-Series Light Bar
• Operating voltage: 9-36 VDC
• Adaptive response: Two layers
• Power management: Active Power Management™
• Speed-based control: Active View Technology™ with internal GPS module
• Housing and heat sink: Alloy construction

What's Included

• Light bar
• Harness
• Switch
• Relay

Fitment

Universal fit. Fits all existing E-Series grilles and mounts.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1