RockJock - rokCE-9112N-11 - Johnny Joint Rod End

RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 in.-14 right hand threads on the shank, and a 2.190 in. mounting width ball with a .482 in. thru bolt hole. Finished in gold zinc plating. Johnny Joint® Rod End; 2 in.; w/1 in. RH Thread/.482 in. X 2.190 in. Ball;

• Narrow Forged Johnny Joint®

The RockJock rokCE-9112N-11 Narrow Forged Johnny Joint Rod End is designed for fabricators and suspension system builders. This 2-inch joint provides 40 degrees of unrestricted movement in any direction, compared with 22 degrees on a common heim joint. A high-density urethane bushing encases the inner ball to provide cushioning that a heim joint cannot provide.

The heat-treated center ball is cross-drilled for thru-bolt lubrication, while two heavy-duty, heat-treated side washers and a snap ring retain the joint internals. The rod end features a greaseable zerk fitting, a 1-inch-14 right-hand threaded shank, a 2.190-inch mounting-width ball, and a 0.482-inch thru-bolt hole. It is finished with gold zinc plating.

What's Included: One RockJock Narrow Forged Johnny Joint Rod End.

Features:

• Unrestricted Movement: Provides 40 degrees of movement in any direction.
• Cushioned Joint Design: High-density urethane bushing encases the inner ball for cushioning.
• Heat-Treated Construction: Features a heat-treated center ball and heat-treated side washers.
• Greaseable Design: Cross-drilled center ball and zerk fitting support thru-bolt lubrication and greasing.
• Product Type: Narrow Forged Johnny Joint rod end.
• Joint Diameter: 2 inches.
• Threaded Shank: 2 1/4 inches of 1-inch-14 right-hand threads.
• Ball and Mounting Data: 2.190-inch mounting width ball with a 0.482-inch thru-bolt hole.
• Finish: Gold zinc plating.
• Fitment: Fitment data was not provided.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1