SPC Performance - spc23194 - 3-1/2° Camber/Caster Sleeve

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove the existing sleeve. To split camber and caster adjustment, rotate sleeve 45deg. Save time during alignment, use 23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford andMazda 4WD light trucks/SUVS. California Residents WARNING Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

• Easily change caster / camber or both at the same time
• Front Adjustment Range RWD: Camber/Caster ±3.50°
• Front Adjustment Range 4WD: Camber/Caster ±2.75°
• Front Adjustment Range RWD: Camber/Caster ±3.50˚
• Front Adjustment Range 4WD: Camber/Caster ±2.75˚
• Clear Zinc coating for corrosion resistance
• Recommended Tools: 77880 - Sleeve Puller
• Required: 1 per wheel

The SPC Performance 3-1/2° Camber/Caster Sleeve is designed to adjust caster, camber, or both on many Ford and Mazda rear-wheel-drive and four-wheel-drive trucks, light trucks, and SUVs. The sleeve installs at the upper ball joint after removing the pinch bolt and any top snap ring, with a sleeve puller used to remove the existing sleeve.

For alignment setup, rotate the sleeve 45° to split camber and caster adjustment. A zero-degree sleeve, such as SPC Performance 23199, can be used to determine initial alignment readings before installing the appropriate sleeve. Adjustment range is smaller on Ford and Mazda 4WD light trucks and SUVs. One sleeve is required per wheel.

The sleeve features a clear zinc coating for corrosion resistance. The recommended sleeve puller is SPC Performance 77880. Product appearance and features may vary as design changes, improvements, and modifications are implemented.

What's Included: One SPC Performance 3-1/2° camber/caster sleeve.

Features:

• Caster and Camber Adjustment: Allows caster, camber, or both to be adjusted at the same time.
• RWD Adjustment Range: Front camber/caster adjustment range of ±3.50° for rear-wheel-drive applications.
• 4WD Adjustment Range: Front camber/caster adjustment range of ±2.75° for four-wheel-drive applications.
• Alignment Setup: Rotate the sleeve 45° to split camber and caster adjustment.
• Corrosion Resistance: Clear zinc coating helps resist corrosion.
• Installation Tool: SPC Performance 77880 sleeve puller is recommended for removing the existing sleeve.
• Application Requirement: One sleeve is required per wheel.
• Technical Data: Brand is SPC Performance; part number is spc23194; product type is automotive; designed for use on many Ford and Mazda RWD and 4WD trucks, light trucks, and SUVs.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1