Skip to product information
1 of 1

Wet Sounds REVO Series Subwoofers - REVO 10

Wet Sounds REVO Series Subwoofers - REVO 10

Wet Sounds

Regular price $434.99 USD
Regular price $484.99 USD Sale price $434.99 USD
Sale Sold out
Shipping calculated at checkout.
Sub Color
Voice Coil Ohm

Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical. 

High Power REVO subs are recommended for applications where there is adequate room for a specifically designed sealed or ported subwoofer enclosure. 

Both 10” & 12” REVO FA subs are available in White or Black frames (Black frames use metallic grey cones). All REVO FA Subs are available in either single 2 Ohm or single 4 Ohm impedances. 

 All REVO 10” & 12” Subwoofers share the same design features:

• Nylas Composite Frame - to withstand extreme environmental use. Designed to accept optional RGB wiring.

• Injection Molded Composite Cone – For durability & low distortion.

• Santoprene Rubber Spider – Much more durable to water & temperature changes than a traditional treated Cotton Spider used by the majority of marine speakers & subwoofers.

• Santoprene Rubber Surround – Offers a superior bond to the composite cone.Also resists deterioration due to water, temperature & ultraviolet exposure. 

• Stainless Steel Terminals – Designed to resist corrosion.

 All REVO Subwoofers are sold without grills.8 different grill designs are available separately for all versions of 10” & 12” REVO HP & FA subwoofers.This will enable users to have matching grills on both REVO Coaxial In-Boat speakers & REVO Subwoofers.

Optional RGB LED Kits are available to fit under all REVO 10” & 12” subwoofer grills to enable users to have thousands of LED light display combinations. 

Mounting Depth:  4.62 inches w/grill (117.47 mm) (HP 4.72in)
Frequency Response:  20Hz to 500HZ
Sensitivity:  88 db at 1watt/1 meter
Diameter:  11.02 inches w/grill (279.90 mm)
Weight:  10 lbs (4.53 kg)
RMS Watts:  300. (HP 400w)
PEAK Watts:  600 (HP 800w)
Impedance:  2ohm or 4ohm
Hole Cut Out:  9.45 inches (240.03 mm)
Box Specs:  Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure. (HP:  Min 1.0 cu ft sealed enclosure or 1.3 cu ft ported)
Sub Size:  10"
Series:  REVO
Cone Color:  Black or white
Application Type:
Free Air - (HP Enclosure)



Shipping & Returns


Care Instructions

View full details