Whiteline whlKTA357 - 2019-2022 Ford Ranger Front Upper Control Arm

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted up to 3 inch/76 mm. Providing an increase +2.0 degrees of caster and minimal camber change (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology. Whiteline Control Arm - Front Upper

• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

The Whiteline whlKTA357 Front Upper Control Arm is designed for modern IFS 4WD vehicles with suspension lifts of up to 3 inches (76 mm). It helps address camber, caster, ball joint articulation, and coil-over strut clearance concerns that may occur after lifting a vehicle by more than 1 inch.

Based on an approximate 2-inch (50 mm) lift, the offset upper control arm provides an increase of up to 2.0 degrees of caster with minimal camber change. Its design increases clearance to the coil-over strut and allows greater arm articulation through Whiteline’s maintenance-free GIIRO bushing technology.

Key Features & Performance Benefits

• Caster optimization: Helps maximize the tire contact patch during suspension roll.
• Improved handling: Supports improved turn-in response and increased directional stability.
• Alignment adjustment: Provides an adjustment window to help rectify or optimize wheel alignment.
• Increased clearance and articulation: Offers greater coil-over strut clearance and arm articulation at ride and droop height.

Key Product Specifications & Technical Data

• Brand: Whiteline
• Part number: whlKTA357
• Product type: Front upper control arm
• Application: Modern IFS 4WD vehicles
• Recommended suspension lift: Up to 3 inches (76 mm)
• Caster increase: Up to 2.0 degrees
• Reference lift for quoted figures: Approximately 2 inches (50 mm)
• Bushing technology: Maintenance-free GIIRO

What's Included in the Box

• Whiteline front upper control arm

Fitment

• 2019 Ford Ranger
• 2020 Ford Ranger
• 2021 Ford Ranger
• 2022 Ford Ranger

Fitments:
2019 Ford Ranger Lariat
2019 Ford Ranger XL
2019 Ford Ranger XLT
2020 Ford Ranger Lariat
2020 Ford Ranger XL
2020 Ford Ranger XLT
2021 Ford Ranger Lariat
2021 Ford Ranger XL
2021 Ford Ranger XLT
2022 Ford Ranger Lariat
2022 Ford Ranger XL
2022 Ford Ranger XLT
2023 Ford Ranger Lariat
2023 Ford Ranger XL
2023 Ford Ranger XLT

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1